OZtrail DTMENSPU-B, Руководство пользователя

Страница: 10 / 12

10
Reducing the risk of jamming fabric in the zip ~
• When using the zip, hold the pull-tab between your thumb and fore
fi
nger with your
thumb facing you.
•As you are closing the zip clear the way in front and under the zip slider using the back of
your hand, and cup the zip slider underneath with your remaining 3 fi ngers.
Use this ac
ti
on for opening or closing. Keep the fabric clear of the zip slider - zip and unzip
slowly.
What to do if the zipper gets caught ~
• Pull the fabric bit by bit out of the slider. Do not try and pull all the fabric in one go. Do
not force the slider or the fabric.
If the slider does not close the zipper properly ~
•With use, the jaws of the zip slider can open ever so slightly. When this occurs the slider
does not compress the zip teeth or coil together
ti
ghtly enough and the zip bursts open
or does not close.
• Undo the zip and with the slider at the end of the zip lightly crimp the jaws of the slider
together. Try top to bo
tt
om axis
fi
rst and then side to side axis.
Crimping A Zip-Slider
A
B
C
The most common reason why zips
burst open is that the zip slider does
not close the coil
ti
ghtly enough.
Wear and tear may cause the gap
marked A to open up.
By simply ‘crimping” the slider
together at points B & C with a pair
of pliers, this solves the problem
most of the
ti
me. Crimping in other
planes is worth a try if B & C does
not work. This is to be done when
the zip slider is s
ti
ll a
tt
ached to the
zip in the open posi
ti
on.
Zips