lower temperatures than conventional corona discharge generators thus improving reliability and
efficiency without the need for separate cooling water circuitry; 4) Maximum ozone output with
minimum high voltage input.
Each cell(s) is separately housed within its own stainless holding chamber (manifold) with consideration
for maximum efficiency. In other words, all the air that is drawn through the chambers is passed
directly through the ozone producing region (corona gap) with little or no waste from improper
channeling.
Each manifold is neatly constructed and conveniently clip into a fuse holder like device for ease in
assembly and servicing. MTTR (Mean Time To Replace) a manifold in less than 3 minutes. Due to the
lost cost of a replacement cell/manifold, the existing cell is not serviceable and is to be considered a
throw-away item should it fail.
5.0 Operating Conditions
Your generator requires special operating conditions in order to maintain performance and reliability.
Your ozone generator is designed to be operated under a negative or positive pressure situation. Your
Ozotech ozone generator has been factory tested to operate at a maximum positive pressure of
5 psi
.
Warranty coverage of your equipment is contingent upon strict compliance with the operating
conditions specified in this manual.
5.1 Operating Environment
External
It is most important to choose a cool, clean external operating environment. Consideration of these
factors should be a priority. Mount your ozone generator in the best possible operating environment
that is available at chosen site. If at all possible, mount in an area that is free of airborne moisture
particles.
Internal
Keep the inside of the generator chassis clean and dry. Dust particles and condensation pose a
challenge to the consistent operation of all ozone generators. Make a note to inspect the internal
cleanliness of the equipment when you perform your scheduled maintenance. For further information
refer to section 6.0.
5.2 Input Power Requirements
Ozotech, Inc., offers the Poseidon ozone generator in a variety of configurations to accommodate a
M43-31281 BK1.5 REV A1
6
