Ozone Hyperlink V3, Руководство пользователя

Страница: 13 / 24

13
2 3
3 4
oPtion 4: 5-line Mode
See 4-Line to 5-line conversion. The kite must be set to Open Cell mode when using 5-line mode.
Ensure the Kite Leash is connected to the Flag Out Line. Activate the Quick Release. The kite will flag out
on line #5, loose inflation pressure and fall to the ground. Check the speed system, bridle lines and flying
lines for twists before restart.
3 4
1 2
When the kite is landed face down, take the handbrake firmly, pull and hold. The kite will reverse from
the ground, turn over, and land leading edge up. The kite is now ready to launch normally.
See “LAUNCHING”.
To release the line from the cleat teeth, first pull
out and down to unlock the line from the teeth,
then set the trimmer line to the desired amount.
Pull the trimmer line down to de-power the
kite. This is needed if you are overpowered, for
unhooked riding, or if you are walking on the
beach or snow.
Release the trimmer line away from you to
increase kite power.
full de-Power Half Power
full Power
All lines should be maintained as close to equal
length as possible. Flying lines can stretch over
time, generally the front lines stretch more as
these take the majority of the load.
To check your lines, unwind the lines from the bar
and have a partner hold the lines even at the bar
end. Taking hold of the lines at the other end, pull
on the lines to check they are even. If the lines are
not even you may either;
1) Stretch out the shorter lines. Attach the shorter
lines to a car hitch or something very solid. Then
take hold of the bar and pull with enough force to
stretch the line. Do this to any lines that are shorter
and re-check that all 4 lines are equal length.
2) Use the Leader Line trimming knots located
underneath the bar ends.
1
st
fly
reVerse relauncH
claMcleat triMMer
triMMing for line stretcH