CARE AND MAINTENANCE
EN
17
16
Step 1
. Lay the mushroomed
wing on the ground or on the
Saucisse pack if you are using
one. It is best to start from the
mushroomed position as this
reduces the dragging of the
leading edge across the ground.
Step 2.
Group leading edge (LE)
plastic reinforcements with the A
tabs roughly aligned. Make sure
the plastic reinforcements lay
side by side. Note the glider is
NOT folded in half; it is folded as
a complete concertina from wing
tip to wing tip.
Step 3.
Group together
the middle and the trailing
edge (TE) of the wing by
sorting the concertina
folds near the B and C
tabs.
Packing
To prolong the life of your wing and to keep the plastic reinforcements in the best possible condition it is very important to pack the wing
carefully.
Ozone recommends to use the concertina packing method exactly as shown so that all of the cells rest alongside each other and the
plastic reinforcements are not unnecessarily bent. It is also good practice to use the supplied foam Folding Pillow, this reduces the angle
of the leading edge fold and helps preserve the plastic reinforcements. The folding pillow can be compressed with the strap and carried in
your harness. Also, using the Ozone Saucisse pack will help preserve the life of the wing and aid with the speed and ease of packing.
SIV and Collapse lines
The Enzo 3 was tested and certified with the use of collapse lines, therefore if you wish to induce collapses
during SIV training collapse lines must first be installed correctly. Ozone would like to remind you that this
wing is not designed for learning SIV manoeuvres and should only be attempted under the supervision
of an expert instructor, over water and with all the necessary safety precautions in place. If you want to
learn how to do SIV then do so on a different wing. Only attempt it with this wing if you have previous SIV
experience with a high aspect ratio wing, such as the M6. Ensure that you fully understand the correct and
safe use of this equipment before attempting SIV.
Collapse lines must be obtained from a 3rd party service centre and the collapse tabs must be sewn in the
correct position on the appropriate profiles. Contact the design team for details.
IMPORTANT
Only attempt SIV
with this wing if you
have previous SIV
experience with a high
aspect ratio wing,
such as the M6.
Содержание Enzo 3
Страница 1: ...Pilots Manual...
Страница 2: ......
Страница 23: ...1258 Route de Grasse Le Bar sur Loup 06620 France...