Ozone Solutions
712-439-6880
www.ozonesolutions.com
Operation, Installation, and Maintenance Instructions
4 YEAR INTERNATIONAL WARRANTY STATEMENT
1.
Ozone Solutions warrants that this ozone generator will be free from defects in material and workmanship for a 4
year period. The warranty period begins on the date of purchase. The original invoice is required as proof of purchase.
2.
If an ozone generator is found to be faulty, Ozone Solutions will either repair or replace the faulty ozone generator
at no charge provided that it is returned to our head office in Hull, IA, USA, transportation charges prepaid and properly
packaged as to ensure that the equipment arrives safely.
3.
To obtain warranty on your Ozone Solution’s ozone generator contact Ozone Solutions prior to shipping the unit to
obtain proper return procedures and an RMA (Return Merchandise Authorization) number, see bottom for contact info.
Exclusions
-Damage caused by misuse, neglect or lack of regular maintenance.
-Cost of installation or removal of the equipment.
-Mica plates and UV tubes are limited to 6 months warranty.
-Wall transformers for DC powered units are warranted for 1 year.
-Damage caused by improper packaging or shipping procedures.
-Extra charges incurred as a result of improper packaging or shipping procedures.
-Shipping to and from Ozone Solutions.
OZONE SOLUTIONS IS NOT RESPONSIBLE FOR ANY DAMAGES TO EQUIPMENT OR PROPERTY, LOST
PROFITS, OR COSTS DUE TO USE OR MISS USE OF ANY OZONE SOLUTIONS PRODUCT.
HVAC-2200
SETTING OF MACHINE
(Refer to ozone application/usage instructions for more detailed instructions.)
1.
This series has controls that feature an On/off switch and a timer to power the unit, and a
continuously adjustable output level control to adjust the amount of ozone being produced. Ozone
production begins when the power switch or timer is turned on, please ensure the level control is
set to low ( #1 on the dial).
2a.
(Setting Ozone Level (occupied areas)) The right level is when all the generated ozone is being
used up to accomplish its job. However, this is difficult to obtain because it becomes a balancing
act. Initially the unit should be used for a shock treatment to get rid of the problem odor as quickly
as possible. After a shock treatment, set the unit at a very low setting, after several hours if there
is a heavy smell of ozone, then there is more ozone present than is required to do the job. A good
indication that the generator is set right is when you come home after being away for 6-8 hours
and smell just a hint of the fresh sweet smell of ozone. Simply turn the output level control down.
This is a case where more is not considered better. The levels of ozone required to deodorize most
environments are from .03 ppm to .1 ppm.
2b.
(Setting Ozone Level (shock treatments)) For most shock treatment applications, the setting
should be set to the highest setting. If the area being treated is small, the setting can be reduced.
ONE-SHOT TIMER INSTRUCTIONS (for applicable models)
The one shot timer is designed to allow the user to turn on the ozone generator and have it turn off after a given
amount of time. Depending on the ozone generator model purchased your timer may or may not have the same
settings as the one shown in the pictures however the operation will be the same.
NOTE: to use the timer make sure the on/off power switch is turned off!
1.
To turn the timer on to constant run (hold) simply press the button once, the top green LED will light up and
after about 2 seconds the machine will turn on.
2.
To set the timer for a one shot timed operation press the button several times until the LED beside the desired
amount of time is lit up, after about 2 seconds the machine will start.
3.
To stop the operation of the timer press and hold the button for 3 seconds until the LED goes out and the ma-
chine stops.
