- 30 -
Before mounting, the minimum safe mounting distances and tilt angles shown
in the figures must be strictly followed.
The distance between the bottom edge of the appliance and the floor must be
at least 1.8 M. See figure 3.
There must be a distance of at least 0.25 M between the appliance and the
ceilings, roofs or other covers. See figure 3.
There must be a distance of at least 0.5 M at each side between the appliance
and walls or the like. See figure 3.
Recommended degree to mounting surface is 45°. See figure 4.
Pay attention that, the installation of the appliance must not add excessive
wind load.
Fix the mounting bracket to the ceiling l first. Ensure that the place to be
installed is secure and firm. Or connect the appliance to the stand.
Adjust the desired angle of radiation and fest screw all screws. Check regularly
the screw's connection. Mechanical bearing pressure and oscillation due to
wind or rain could lead to loose.
Plug in the power source and operate the remote control. Then observe,
whether during the first 10-15 minutes the appliance works trouble-free.
If you do not use,please remove battery socket