- 25 -
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
similar coverings. Do not route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped over.
Connect to properly grounded outlets only.
To disconnect heater, turn controls off, then remove plug from outlet.
Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner. Do
not use on soft surfaces, like a bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in areas
where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or injury to
persons.
Always plug heaters directly into a wall outlet/receptacle. Never use with an
extension cord or relocatable power tap (outlet/power strip).
Check if the voltage indicated on the nameplate of the appliance corresponds to
the local mains voltage before you connect the appliance.
The appliance is not located immediately below a wall socket-outlet.
The casing and the front cover of the appliance become extremely hot during
operation. Pay attention that, no combustible material due to wind or other
environmental influences covers or obstructs the appliance, such as curtains,
marquees, flags, plastic foil etc. Do not touch the appliance. Caution! Risk of
scald injury!
In case of improper use, there is a risk of electrical shock and/or fire hazard.
Operation of the appliance must be discontinued and remove the mains plug
immediately. Do not try to repair the appliance by your-self. Please contact with
the service agent or a suitably qualified electrician for maintenance.
Remove the plug from the power outlet and wait until the appliance is
sufficiently cooled off before cleaning.
