ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
AC
DC
I
0
I
+
MODE
I
Attaching Inflation Adaptors
The inflator unit has 3 adaptors to allow a range of functions. All the
adaptors are secured in the compartment at the side of the unit.
1. Open the side compartment and
remove the desired inflation
adaptor.
2. Remove the high pressure air hose from
the back of the tool and unlock the nozzle
by lifting the locking lever.
3. Insert the adaptor into the hose
nozzle and lock by pushing down
the locking lever.
Attaching The High Volume Hose
When inflating, connect the high
volume hose to the ‘AIR OUT’ port.
When deflating, connect the hose to
the ‘AIR IN’ port.
1. Align the cutouts in the hose
with the tabs in the desired port.
2. Insert the hose and twist
clockwise to lock the hose in
place.
3. Tug gently on the hose to ensure
it is installed securely.
1.
Adaptor Storage
2.
Manual Mode Switch
3.
Carry Handle
4.
Operation Mode Switch
5.
High Volume Air Hose
6.
Digital Display
7.
Battery Seating
8.
Pressure Selection Buttons
9.
High Pressure Hose
10. Presta Adaptor
11. General Purpose Adaptor
12. Ball Adaptor
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
CORDLESS INFLATOR / DEFLATOR
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. CONNECTING ACCESSORIES
SETUP & PREPARATION
AIR IN
1
2
4
5
3
7
6
8
10
9
11
12
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
AC
DC
I
0
I
+
MODE
I
AC
DC
I
0
I
+
MODE
I
a
b
AC
DC
I
0
I
+
MODE
I
AIR IN
AIR IN
