8
ASSEMBLY (cont.)
8. Once the vacuum bracket (4) is securely attached, place
the Vacuum into the vacuum bracket (4), ensure the on/off
switch (6) is situated at the bottom of the vacuum bracket
(4) and the carry handle (7) is facing outwards (Fig. 4).
9. Securely fasten the Vacuum to the vacuum bracket (4)
using the buckle (8) around the top of the vacuum
bracket (4). Clip and secure around the buckle (8) and
then fasten by pushing the clasp back towards the
strap (Fig. 5).
Mounting the Accessory Rack to the Wall
WARNING!
Make sure that within the wall there are no electrical wires, cables, or
plumbing pipes in the drilling path.
1. Carefully plan the location on the wall of where you want to mount the accessory
rack (23). Ensure the mountable surface is solid and strong to withstand the weight
of all the accessories.
2. Using a pencil (not provided), mark the wall with the
pencil through the five screw holes in the accessory
rack (23) (Fig. 6 and 7).
3. Remove the accessory rack (23) from the wall and drill the
five holes in the wall.
4. Place a wall plug (28) into each of the 5 drilled holes and
align flush with the wall surface.
5. Align the five mounting holes in the accessory rack with
the five wall plugs (28).
6. Prior to fixing 2 of the (M4 x 20) screws (26) on the
bottom of the accessory rack (23), place the 2 hose
brackets (23) behind the accessory rack (16) and fix to
the wall with 2 of the (M4 x 20) screws (26) provided.
7. Then fix the remaining 3 (M4 x 20) screws (26) in the remaining 3 holes and fit each
one to the wall by turning in a clockwise direction, do not fully tighten.
8. When all five (M4 x 20) screws (26) are loosely inserted, tighten each individual (M4
x 20) screw (26) to securely fasten the accessory rack (23) to the wall.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
WMV-1200 manual.qxd 9/16/10 4:02 PM Page 9
Содержание WMV-1200
Страница 1: ......