Attaching The Castors
1. Turn the tank upside down
and place on a level surface.
2. Press a castor wheel firmly
into the slot until it clicks
into place.
3. Repeat for the other 3
castors.
Attaching The Motor Unit
1. Align the sides of the motor
unit with the motor securing
clips on the tank.
2. Hook the securing clips over the lip of
the motor unit and then press lower
end of the clips against the sides of
the tank to lock them in place.
Attaching The Handle
1. Align the handle with slot on
the top of the motor unit.
2. Insert and push down firmly
until it clicks into place.
1. On/Off Switch
2. Carry Handle
3. Accessory Storage Slot
4. Blower Port
5. Cord Hook
6. Filter Cage
7. Extension Tube
8. Castor Wheels
9. Accessory Storage Slot
10. Motor Securing Clip
11. Vacuum Port
12. Motor
WET & DRY VACUUM
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
3
4
10
9
7
5
6
12
11
8
WARNING!
ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.