Using The Extension Tubes
The vacuum reach can be extended by attaching one or more
sections of the extension tubes.
1. Push the hose adaptor into the free
end of the vacuum hose.
2. Push the wider end of the extension
tube onto the adaptor.
Attaching Tools
Use the floor tool to vacuum solids
and liquids over medium to large
areas.
Use the crevice tool to clean tight corners and
narrow spaces.
Switching The Vacuum On or Off
1. Press the switch on the ‘I’
symbol to switch the unit on.
2. Press the switch on the ‘0’
position to switch the unit
off.
WARNING!
WHEN WET VACUUMING, THE SAFETY
FLOAT STOPS THE VACUUM SUCTION AUTOMATICALLY
WHEN THE MAXIMUM CAPACITY IS REACHED. SWITCH
OFF THE VACUUM AND EMPTY THE TANK BEFORE
CONTINUING TO VACUUM.
WARNING!
IF THE VACUUM TIPS OVER DURING USE,
THE SAFETY FLOAT WILL ALSO ENGAGE TO PREVENT
SPILLAGE. SWITCH THE VACUUM OFF, REST IT
VERTICALLY ON THE WHEELS & WAIT FOR THE FLOAT
TO RESET BEFORE CONTINUING TO VACUUM.
4. CONTROLS
OPERATION
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
A RESIDUAL CURRENT DEVICE (RATED 30mA OR
LESS) SHOULD BE USED.
VWD-1212
