2. CHANGING DRIVER BITS
3. SWIVEL HANDLE
Installing CRV Bits
1. Insert the CRV bit directly into the bit holder until it clicks into place.
Removing CRV Bits
1. Pull the quick connect chuck back to release the CRV bit.
2. Whilst holding the chuck back, pull the CRV bit to remove from the
bit holder.
Inline Position
1. Hold the handle locking
button down.
2. Rotate the handle clockwise until it clicks into position.
Angled Position
1. Hold the handle locking
button down.
2. Rotate the handle anti-clockwise until it clicks into position.
