CAUTION!:
FOR ALL TYPES OF CUTS ENSURE
THE SAW IS LOCKED INTO POSITION.
Depending on the cut, the
material clamp will need
to be mounted on the
appropriate side. When
performing bevel cuts,
the work clamp must be
on the opposite side of
the bevel (otherwise it will
interfere with the cutting
action).
The lower guard provides protection to your hands and limbs when
the mitre saw head is in the up position. During the operation of
the saw, when the saw is turned on and you are making a cut, the
lower guard retracts over the upper guard as the saw is lowered
into the work piece.
A compound mitre cut involves
using a mitre angle and a bevel
angle at the same time.
1.
2.
OPERATION
The tool is recommended for use with a residual current device
with a rated residual current of 30mA or less.
Retractable Safety Guard
CAUTION!:
DO NOT USE THE MITRE SAW TO CUT
METAL OR MASONRY.
A straight cut is made by cutting
the grain of the workpiece. A
90
°
straight cut is made with the
mitre scale set in the 0
°
.
Mitre
45º<
>45º
Mitre cuts are made with the
mitre scale set at an angle other
than 0
°
Mitre
45º<
>45º
A bevel cut is made by cutting
across the grain of the workpiece
with the blade angled to the
mitre table.
3. TYPES OF CUTS
Spindle Lock
The spindle lock prevents the
blade in the saw from rotating.
Depress and hold the spindle
lock while installing, changing,
or removing the blade. Never
press when blade is rotating.
Straight Cutting
When cutting a narrow piece of wood, it is not necessary to use the
slide mechanism.
Bevel Cutting
Fence
Make sure that no part
of the tool contacts the
upper fence when bevel
or compound mitre
cutting. Always make
a dry run with the saw
turned off and check
clearance. Tighten
securely before making
a cut.
Mitre Cuts
Note:
For Bevel Cuts ensure the rear fence is adjusted for
blade clearance.
Compound Mitre Cuts
Material Clamp
1. To retract the lower guard,
slide the release lever right
with your thumb and press
handle down.
Max. cutting
capacity wood:
62 x 310mm
Max. cutting
capacity wood:
62 x 210mm
Max. cutting
capacity wood:
36 x 310mm
Max. cutting
capacity wood:
left 36 x 210mm
right 20 x 210mm
