SCD-7000
3. DRYWALL SCREWING
4. HELPFUL TIPS
1 Depress and release the
on/off trigger to ensure it is not
locked on.
3 Holdthescrewdriverfirmly
and place the bit at the point to
be drilled.
5 Move the screwdriver towards the workpiece as the screw goes in.
2 Check the forward/reverse
lever is on desired setting.
4 Lightly depress the on/off
trigger to start the tool.
Before connecting your screwdriver to a power supply, perform a few
simple checks.
Note:
Do not force the screwdriver or apply side pressure to elongate
the hole. Let the tool do the work.
Drilling to a pre-set depth - Torque Settings
Torque settings can alter the depth to which you can drive screws
into a surface. To determine the torque setting required to drive a
screwperfectlyflushtoaworksurface,followthebelowsteps.
1. Set the torque collar to the
lowest setting and tighten
thefirstscrew.
2. If the clutch rachets and
makes a clicking sound
beforethescrewisflush,
increase the collar setting
and continue tightening.
3. Repeat until you reach the
correct setting/ screw depth.
Use this torque setting for
the remaining screws.
FWD
REV
