ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Collet Nut
2 Shaft Collar
3 Spindle Lock Button
4 Accessible Brushes
5 Variable Speed Dial
6 On/off Switch
7 Hanging Ring
8 Power Cord
ROTARY TOOL
KNOW YOUR PRODUCT
1. CHANGING ACCESSORIES
9 Flexible Shaft
10 Locking Chuck
11 Spindle Lock
12 Fitting Collar
13 Rotary Bits x 42
14 Tool Stand Shaft
15 Desk Clamp
16 Cutting Guide
ACCESSORIES
SETUP & PREPARATION
1 2 3
4 5 6
7 8
9 10 11
12
13 14 15
16
WARNING!
ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING ANY
OF THE FOLLOWING OPERATIONS.
CAUTION!
IT IS RECOMMENDED THAT NO ACCESSORY
LARGER THAN 55MM IN DIAMETER SHOULD BE FITTED
TO THE ROTARY TOOL.
1 Press and hold the spindle
lock button.
2 Unscrew the collet nut and
remove completely.
3 Select a suitable collet for
the accessory to be used
and insert. Then cover
with collet nut.
4 Lightly tighten the collet nut so
that it stays in place.
5 Insert shaft of accessory
into the collet.
6 Tighten collet nut using spindle
lock and spanner.
