RTK-2100
4. CONTROLS
5. OPERATING THE ROTARY TOOL
CAUTION:
PLACING EXCESSIVE LOAD ON THE
ROTARY TOOL WHILE IT IS RUNNING AT LOW
SPEEDS MAY CAUSE IT TO OVERHEAT AND THE
MOTOR TO FAIL.
OPERATION
The tool is recommended for use with a residual current device
with a rated residual current of 30mA or less.
To turn on, set the variable
speed dial to 1 then push the
on/off switch to “I”.
On/Off Switch
To turn off, set the variable
speed dial to 1 then push the
on/off switch to “0”.
Scroll throught the variable
speed dial to select the
appropriate speed.
Variable Speed Dial
Note:
The higher the number on the variable speed dial the
faster the oscillation frequency of the rotary tool.
1. Turn the rotary tool on.
2. Select the appropriate
speed for the application.
3. For high precision
applications such as
engraving or milling,
hold the rotary tool
like a pen.
4. For heaviey work
like cutting or
grinding, hold the
rotary tool in the
palm of your hand.
5. Gently apply the tip of
the accessory to the
workpiece.
