ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Fence
2. Table Extension
3. Mitre Gauge
4. Feather Board
5. Switch Box Outlet
6. On/Off Switch
7. Guard
8. Dust Port
9. Leg
10. Table
ROUTER TABLE
KNOW YOUR PRODUCT
1. ASSEMBLY
Attaching the legs and table extensions.
3. Place table leg as
shown. Loosely fix
in position using four
screws and flange lock
nuts, do not fully tighten
yet.
6. Repeat steps 2 to 5 for the other table extension and table legs.
Once all four legs are securely tightened, turn assembly over
and check the router table does not rock.
SETUP & PREPARATION
The router table must be fully assembled before use.
2. With the table and
one table extension
upside down on a flat
surface, align the table
extensions as shown.
Once aligned, slide
the table and table
extension together.
NOTE:
The table leg fits inside
the table profile, with fixing
screws inserted from the outside.
1. Use 16, 18mm Phillips head
assembly fasteners as
shown.
4. Repeat step 3 above for opposite table leg.
5. Once both table legs are loosely fitted, ensure the table and
table extension are lying perfectly flat, gently tighten all screws,
working from the centre to the outside.
Insert router mounting bolts
1. Use 4, 50mm Coach bolts, router clamps and assembly
fasteners as shown.
2. Insert four 50mm
coach bolts into the
holes as shown from
the top of the table.
3. From the underside,
loosely fit bracket,
washer and flange nut
as shown. Do this for
all four bolts.
ACCESSORIES
11. Table Inserts x 5
