![background image](http://html.mh-extra.com/html/ozito/pxwbs-200/pxwbs-200_instruction-manual_1666211005.webp)
5. OPERATION
6. USING THE INFLATION ADAPTORS
PXWBS-200
Blowing
The blower is ideal for dirt, clippings and other debris.
Inflation Adaptors
The PXWBS-200 comes complete with 3 inflation adaptors in
varying sizes which are suited for use on devices that require a
large air volume, at a low pressure. These include items such
as air mattresses and pool toys.
WARNING!
DO NOT SWITCH THE BLOWER ON IN
POORLY VENTILATED SPACES OR IN THE PRESENCE OF
FLAMMABLE AND/OR EXPLOSIVE LIQUIDS, GASES AND
POWDERS.
WARNING!
ENSURE THE BLOWER OUTLET IS NOT
BLOCKED DURING USE.
2 Move the blower from
side to side while walking
slowly forward.
3 Connect inflation adaptor
to workshop blower
housing and rotate
adaptor clockwise until
it clicks into locked
position.
4 To fit inflation adaptor to
a small inlet, use either
of the other 2 adaptor
ends. Fit larger end of
smaller adaptor piece to
central adaptor.
5 Fit small end of adaptor
to the inlet on the device
to be inflated. Once
fitted, use On/Off switch
to inflate device.
6 To Remove adaptor,
turn in anti-clockwise
direction.
Note:
Be aware of other people and animals in the area where
you are to be operating the blower.
Note:
Avoid collisions with hard objects which could damage
your machine.
Note:
The PXWBS-200 Workshop Blower is not suited to
inflating devices that require high air pressure - such as sporting
equipment and car types.
1 Hold the blower firmly,
squeeze the on/off
switch.
1 Remove blower nozzle.
2 Line up nodes on inside
of centre inflation adaptor
with the workshop blower
connection slot.