Ozito PXMSS-700 Скачать руководство пользователя страница 7

Power tools that are no longer usable should not be disposed of 

with household waste but in an environmentally friendly way. Please 

recycle where facilities exist. Check with your local council authority 

for recycling advice.

Recycling packaging reduces the need for landfill and raw materials. 

Reuse of recycled material decreases pollution in the environment. 

Please recycle packaging where facilities exist. Check with your 

local council authority for recycling advice.

DESCRIPTION OF SYMBOLS

CARING FOR THE ENVIRONMENT

Spare parts can be ordered from the Special Orders Desk 

at your local bunnings Warehouse. 
For further information, or any parts not listed here, visit 
www.ozito.com.au or contact Ozito Customer Service: 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

SPARE PARTS

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING  

INSTRUCTIONS FOR YOUR BATTERY CHARGER.

1. 

Before using the charger read all instructions and cautionary markings on the 

charger, battery pack and the product using the battery pack.

2. 

This charger is not intended for any uses other than charging rechargeable 

batteries. Any other use may result in risk of fire, electric shock or electrocution.

3. 

Do not place any object on top of the charger or place the charger on a soft surface 

that may result in excessive internal heat. Place the charger in a position away 

from any heat source.

4. 

To reduce risk of damage to the electric plug and cord, pull by the plug rather than 

the cord when disconnecting the charger.

5. 

Make sure the cord is located so that it will not be stepped on, tripped over, or 

otherwise subjected to damage or stress.

6. 

An extension cord should not be used unless absolutely necessary. Use of an 

improper extension cord could result in the risk of fire, electric shock or electrocution.

7. 

Do not operate the charger if it has received a sharp blow, been dropped or 

otherwise damaged in any way. Have it checked by an electrician or power tool 

repairer.

8. 

Do not disassemble charger. Take it to an electrician or power tool repairer when 

service or repair is required. Incorrect reassembly may result in a risk of electric 

shock, electrocution or fire.

9. 

To reduce risk of electric shock, unplug the charger from the outlet before 

attempting any cleaning. Removing the battery pack will not reduce this risk.

10.  Never attempt to connect 2 chargers together.

11.  DO NOT store or use the tool and battery pack in locations where the temperature may 

reach or exceed 40ºC (such as inside sheds or metal buildings in summer).

12.  The charger is designed to operate on standard household electrical power (240 

volts). Do not attempt to use it on any other voltage!

13.  The battery pack is not fully charged out of the carton. First read the safety 

instructions and then follow the charging notes and procedures.

14.  The longest life and best performance can be obtained if the battery pack is 

charged when the air temperature is between 18 - 24ºC. Do not charge the battery 

pack in an air temperature below 10ºC or above 40ºC. This is important and will 

prevent damage to the battery pack.

15.  Do not incinerate the battery pack even if it is seriously damaged or is completely 

worn out. The battery can explode in a fire.

16.  Never attempt to open the battery pack for any reason. If the plastic housing of the 

battery pack breaks or cracks, immediately discontinue use and do not recharge.

17.  During charging, the battery must be placed in a well ventilated area.

BATTERY AND CHARGER SAFETY WARNINGS

Warning 

Read instruction manual

 ø

 

    

Diameter

      

 

mA

     

Milliamperes 

 

 

Recycle battery 

   

Do not put in the rubbish

Polarity

Do not incinerate   

 

 

Do not get battery wet

Thermal cut-out protection

Transformer Energy

Rating (MEPS)

Double insulated 

/min     

Revolutions or reciprocation per minute

Ah 

   

Amp hour

Indoor use only

Lithium Ion battery

Do not use or store battery in 

temperatures exceeding 50

º

C

   

Electrical Emissions 

Conformity (EMC)

     

n

o      

No load speed

  

V

 

    

Volts

 

 

 

            

Hz

      

Hertz

ac/~

      

Alternating current 

            

W

 

    

Watts

  

    

Direct current

 

 

dc/

Do not expose to rain.

Содержание PXMSS-700










Отзывы: