ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
12. Safety Key
1. Wheels
2. Height Adjustment Lever
3. Battery Cover
4. Carry Handle
5. Grass Catcher Flap
6. Folding Handle
7. Start/Stop Lever
8. Lock-Off Button
9. Handle Quick-release Lever
10. Grass Catcher
11. Cutting Deck
CORDLESS LAWN MOWER
KNOW YOUR PRODUCT
1
9
2
10
3
11
4
5
6
7
8
12
1. ASSEMBLY
SETUP & PREPARATION
The handle in folded in the transport position when packed in the box.
1. To unfold, flip outwards the four
handle quick-release levers on either
side of the mower. If necessary,
turn the quick-release lever back
sufficiently on the thread so that the
handle quick-release lever can then
still be flipped outwards.
Folding Handle
Lock
WARNING!
ENSURE THE TOOL IS SWITCHED OFF
AND BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
ACCESSORIES
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from the Ozito
Power X Change Range.
Lock
2. Before raising the handle assembly, lock the two upper quick-release
levers. Only turn the quick-release lever in each case so far on the thread
so that it can still be flipped towards the closed position again.
Lock
3. You can adjust the angle of the handle by flipping up the two upper
quick-release levers with three settings available for the angle. As you do
this, make sure that both sides are set to the same position. To secure the
handle again, flip the two
quick-release levers back
into the closed position.
4. Secure the cord to the
handle with the two
supplied cord clips.
Note:
Ensure the cord
follows the handle smoothly
from the switch to the body of
the mower.
