![background image](http://html1.mh-extra.com/html/ozito/pwb-2200/pwb-2200_instruction-manual_1666645004.webp)
4. PRE-START PROCEDURE
OPERATION
NOTE:
THE PUMP REQUIRES A MINIMUM WATER
SUPPLY OF 15L/MIN AT 20PSI TO AVOID DAMAGING
THE PUMP DUE TO INSUFICIENT WATER SUPPLY.
1. Ensure water
supply is
connected.
2. Ensure water supply is
turned on.
3.
Squeeze trigger on the gun until there is a steady flow of water
from the nozzle.
Water Supply
4. Run water through
your garden hose
to remove any
foreign matter before
attaching to the
pump.
5. Attach garden hose to the inlet on the pump.
Note:
A plastic filter is fitted to the inlet preventing any debris
from entering the pump. Inspect and clean the filter before use as
insufficient water supply could damage the pump.
Spray Nozzle
4. Check that oil and fuel tanks are full.
Note:
The trigger can be locked
to prevent accidental spraying.
Disengage trigger lock before
squeezing the trigger.
6. Adjust the nozzle to provide fan (wide) or stream (narrow) water
patterns.
Stream
Fan
7. Adjust the nozzle for high or
low pressure.
HIGH
LOW
OIL
1