ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Float Switch Cable
2. Float Switch Adjustor
3. Float Switch
4 Pump Housing
5 Suction Base
6 Outlet
7 Power Cable
8 Handle
SUBMERSIBLE PUMP
KNOW YOUR PRODUCT
1. UNIVERSAL ADAPTOR
Preparing the Universal Adaptor
The universal adaptor is designed to fit various sizes of pipes and
fittings.
9. L-Shape Connector
10. Universal Adaptor
ACCESSORIES
SETUP & PREPARATION
To fit a 25mm (1’’) tap adaptor
(temporary application only)
1. Cut the universal adaptor using a
hack saw
2. It is now ready to be fitted with a
25mm (1’’) screw on tap adaptor
(not included).
To fit a 32mm (1¼’’)
rigid pipe or flexible tubing
(temporary or permanent application)
. Cut the universal adaptor using
a hack saw. It is now ready to be
fitted with a 32mm (1¼’’) rigid pipe
or flexible tubing (not included).
To fit a 25mm (1’’) rigid pipe or
flexible tubing
(temporary or permanent application)
. No cutting of the universal adaptor
is required. It is ready to be fitted
with a 25mm (1’’) rigid pipe or
flexible tubing (not included).
Ensure the pump is disconnected from the power supply
before performing any of the following operations.
10
NOTE:
TO USE THE PUMP IN PERMANENT
INSTALLATIONS WITH RIGID PIPES, INSTALL A
NON-RETURN VALVE TO AVOID THE FLUID BEING
RE-CIRCULATED ONCE THE PUMP HAS STOPPED.
