Attaching The Spray Head
1. Press the Spray Head Locking
Knob and turn it anti-clockwise to
the unlocked position.
Note:
Ensure the Spray Head and Spray Gun body are aligned correctly for
proper fitting.
2. Insert the Spray Head fully into
the Spray Gun.
3. Press the Spray Head Locking
Knob and turn it clockwise to
the locked position to secure the
Spray Head in position.
Aligning The Suction Tube
1. When spraying horizontal or low
objects, turn the Suction Tube so
that the opening faces forwards.
2. When spraying overhead objects,
turn the Suction Tube so that the
opening faces backwards.
Thinning Paints
Thinning is particularly important when spraying. Most paints are supplied
ready for brush application and need to be diluted sufficiently for spraying
purposes.
Follow the manufacturers guide for thinning
ratios which should be labelled on the paint container.
1. Before pouring any paint or
thinners work out how much of
each substance is needed.
2. Pour the required paint and
thinners through a filter into a
mixing cup and mix thoroughly.
2. ASSEMBLY
3. PAINT PREPARATION
PAINT
THINNERS
PAINT
THINNERS
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING!
FOR BEST RESULTS, SURFACE
PREPARATION AND PAINT THINNING SHOULD BE
PERFORMED. ENSURE ALL SURFACES ARE FREE OF
DUST, DIRT, & GREASE.
WARNING!
PAINTING CAN BE A MESSY TASK.
WEAR SUITABLE CLOTHING AND ENSURE THE
SURROUNDINGS ARE PROPERLY COVERED
AND PROTECTED. USE OF A DROPSHEET IS
RECOMMENDED WITH THE SPRAYER.
