ONLINE MANUAL
Scan this QR Code with your mobile device
to take you to the online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1. Align the split blower tube with
the outlet of the blower.
3. Align the blower tube
extension with the end
of the split blower tube
and slide into place.
2. Push the split blower
tube onto the blower
until it clicks into place.
Fitting the Blower Tubes
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
CORDLESS SPLIT TUBE BLOWER
1
2
3
4
1. Blower Tube Extension
2. Split Blower Tube
3. Blower Tube Lock Tab
4. On/Off Switch
5. Sure Grip Handle
5
4. To lock into place, rotate
extension in clockwise direction
until extension clicks into place.
5. To remove blower tube extension, rotate in anti-clockwise direction.