Bevel Adjustment
1. Loosen the bevel adjustment
knob.
2. Align the baseplate to the
desired angle on the bevel scale.
3. Tighten the bevel adjustment
knob.
Turning The Tool On & Off
1. Press and hold the safety lock-off
button in either direction.
2. Squeeze the on/off trigger to
start the saw.
Note:
Allow the saw to reach
steady speed before beginning a
cut.
3. To stop the saw, release the on/off trigger.
WARNING!
AFTER USE, HOLD THE SAW AWAY
FROM YOUR BODY UNTIL THE BLADE STOPS
SPINNING COMPLETELY.
Note:
Do not put down the saw until the blade has stopped completely.
Cutting Guide Notch
The cutting guide notches provide an approximate line of cut depending on
the bevel angle of the blade.
For a straight cut, use the 0° notch. For a 45° bevel cut, use the 45° notch.
Approximate between the two notches for other angles of bevel cut.
Note:
Always test cut settings on a scrap piece of wood.
4. CONTROLS
OPERATION
45°
30°
45°
30°
RIGHT HANDED SAW
THIS SIDE OUT
24
184
MM
TOOTH
Max. Speed 9500rpm
Bore: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
(7¼”)
WARNING!
Do not use tungsten carbide tipped blades for
masonry or metal cutting applications.
45°
30°
0°
0°
5°
45°
30°
45°
30°
0°
45°
