OPERATION
PXCUSS-018
WARNING!
THE PRODUCT IS INTENDED FOR
OUTDOOR USE IN A WELL-VENTILATED AREA.
1. Place the spreader on a flat level surface and fill spreading material into
the hopper.
Filling the Hopper
3. PREPARATION
4. USING THE UNIVERSAL SPREADER
Note:
The hopper capacity is 3.3 litres, do not overfill.
1. Place the spreader on a flat level
surface and fill spreading material
into the hopper.
WARNING!
BEWARE OF THROWN OR FLYING
OBJECTS. KEEP ALL BYSTANDERS, ESPECIALLY
CHILDREN AND PETS AWAY FROM THE OPERATING
AREA.
WARNING!
BEFORE WORKING WITH SPREADER
MATERIALS, READ THE INSTRUCTIONS ON THE
FERTILIZER OR SEED PACKAGING.
2. Slide the battery in so that it
clicks into place.
12
34 56
7
8
12
34 56
7
8
12
3
4 56
7
8
12
3
4 56
7
8
6
12
3
4 56
7
8
3. Set the setting recommended for
the relevant spreading material
using the flow rate adjustment
dial.
4. Set the required speed of
material flow using the speed
controller.
Initially we recommend using a low
speed, or “1” the lowest setting.
12
34 56
7
8
12
34 56
7
8
1
6
5. Squeeze the On/Off
trigger to start the
spreader.
6. After carry out work
on a small area,
adjust the settings as
necessary.
WARNING!
ALWAYS WEAR EYE PROTECTION. USE
PERSONAL PROTECTIVE EQUIPMENT SUCH AS DUST
MASK, NON-SLIP SAFETY FOOTWEAR AND HEAVY
DUTY ANTI-SLIP GLOVES.
WARNING!
WHEN USING HARD GRANULAR
MATERIALS A BUILD UP OF RESIDUE AROUND THE
SPREADING WHEEL MAY RESTRICT THE TOOLS
PERFORMANCE. WE RECOMMEND THAT YOU CLEAN
THE SPREADING WHEEL IMMEDIATELY AFTER YOU
USE IT.
