2. CONTROLS
1. Squeeze the On/Off trigger to
start the spreader.
2. To stop the spreader release the
On/Off trigger.
Switching On and Off
12
34 56
7
8
12
34 56
7
8
1
6
Spreading Width Adjustment
The material throw width can be adjusted for a small area (1.7m wide) up to a
larger area (5m wide) for a wider area of coverage.
1. Adjust inwards for a smaller area of coverage.
Note:
The On/Off trigger activates both the spreader wheel and opening for
the spreader material
Electronic Speed Control
1. To achieve the greatest speed
and distance the material is
distributed, move the control to
the highest setting, “6”.
2. To reduce the speed and
distance the material is
distributed, move the control
to a lower speed, or “1” the
lowest setting.
12
34 56
7
8
12
34 56
7
8
1
6
12
34 56
7
8
12
34 56
7
8
1
6
12
34 56
7
8
12
34 56
7
8
1
6
Material Flow Rate Adjustment Dial
Note:
The dial controls the size of the opening for material flow rate.
12
3
4 56
7
8
12
3
4 56
7
8
6
12
3
4 56
7
8
1. Set a low flow rate for smaller
quantities and increase the flow
rate for larger quantities.
Setting “1” smallest (opening), setting
“8” largest (opening).
Note:
Numerous variable factors (such as walking speed, working height,
motor speed etc.) do not allow a specific recommendation of the spreading
setting. Rather, the optimal setting must be determined by the user when
starting with the work.
2. Adjust outwards for a wider area of coverage.
