3. SIDE HANDLE & SHOULDER BELT
2. DUST BAG
The dust hose and dust bag allow for dust to be captured for easy
clean up and should be fitted to help maintain a clean and health
working environment.
The supplied shoulder belt can be attached to the tool to help carry
some of the weight of the tool.
The dust bag has a handle to allow you to carry the dust bag with
you while you operate the tool around the room.
Fitting the Dust Bag and Hose
Sander Shoulder Belt
Dust Bag Carry Handle
Attaching the Side Handle
Emptying the Dust Bag
1 Push the end of the dust
hose onto the dust port at
the back of the tool.
1 Attach the clips at the end
of the belt to the hooks on
the front of the sander.
1 Position the dust bag over a
bin and slide the plastic clip
at the base of the dust bag
sideways.
2 To remove the dust
bag and hose, pull
the end of the hose
off the tools dust port.
2 Place the belt over
your shoulder.
2 Once emptied, slide
the plastic clip back
onto the base of the
dust bag to seal the
bag.
The dust bag should be
emptied when the bag
is half full, to maintain
optimal dust extraction.
1 Place the carry
handle over your
shoulder.
1 Attach the side
handle by rotating
clockwise into 1 of
the 2 holes either
side of the tool.