9
Assembling the Direction Nozzle
Align the wide end of the nozzle to the opening of the blower housing. The small hole
on the connecting side of the nozzle should be matched up with the notch on the
blower housing. Join the two by pushing them together.
To Remove the Battery Pack
• Simultaneously depress the release buttons on either side of the battery pack and
pull the battery pack away from the blower housing.
To Install the Battery Pack
• Align the tongue of the battery pack to the matching cavity in the blower housing.
• Push the battery pack into the housing until both battery pack release buttons have
locked into the housing of the blower.
• Do not force the battery pack into the housing of the blower. The battery pack fits
one way only.
• Ensure the battery pack is secured properly to the housing prior to using
the blower.
On/Off Switch
Holding the operator handle with your preferred hand, place your fingers over the
trigger. To turn on the blower, squeeze the trigger. To turn off the blower release
the trigger.
With continuous use the battery and operating handle may become warm to touch.
This is normal and doesn't indicate a problem.
Note:
Keep the air vents of the blower free from leaves and debris.
DO NOT BLOCK AIR INTAKE PORT.
Blocking the air intake port during operation will decrease the performance of the tool
and may lead to the product overheating and failing.
THIS IS NOT COVERED UNDER WARRANTY. KEEP CLOTHING CLEAR OF AIR
INTAKE PORT.
ASSEMBLY
OPERATION
Содержание OZCBL18VA
Страница 1: ......