Ozito OZBP110WAU Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 8

Ozito OZBP110WAU Скачать руководство пользователя страница 4

4. APPLICATION

5. POLISHING

OZBP110WAU

1

Ensure a clean application

bonnet is fitted to the foam

pad.

1

Ensure a clean polishing

bonnet is fitted to the foam

pad and the compound has
been evenly applied to the
surface.

3

Allow the motor to reach maximum speed. Move the polisher
onto the surface using long sweeping strokes in a crisscross
pattern.

3

Allow the motor to reach maximum speed. Move the polisher
onto the surface using long sweeping strokes in a crisscross
pattern.

2

Hold the polisher
away from the
surface and start
by pressing the
on/off switch into
the on position.

2

Hold the polisher
away from the
surface and start
by pressing the
on/off switch into
the on position.

Note:

Do not apply excessive force to the polisher. Allow the

polisher to do the work.

Note:

Do not apply excessive force to the polisher. Allow the

polisher to do the work.

Note:

Never use the polishing bonnet to apply polish to a

surface.

Note:

If the polish seems too difficult to buff, you may have

applied too much polish.

«
...
2
3
4
5
6
...
»

Содержание OZBP110WAU









Отзывы:

Нет отзывов