Test a small inconspicuous area of the surface.
Refer to polish manufacturer’s instructions regarding application
and drying times.
Using too much polish may:
• Reduce the life of the foam pad
•
Make polishing difficult and take longer
• Cause bonnet to come off
Note:
Never use abrasive compounds.
3. SWITCHING ON & OFF
OPERATION
2. ATTACHING THE BONNETS
1
Press the on/off switch to
the on position “ I ” to start
the polisher.
2
Press the on/off switch to
the off position “ 0 ” to stop
the polisher.
1
Pull one side of the bonnet
off the foam pad.
1
Pull the bonnet over one
side of the foam pad.
2
Pull the remaining
bonnet over the
foam pad.
2
Slide the bonnet
off the foam pad.
Attaching the Bonnet
Before Polishing
Switching On and Off
Removing the Bonnet
WARNING:
THE POWER SUPPLY FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE RATED AT 30mA OR LESS.