background image

3

ONLINE MANUAL

Scan this QR Code with your 

mobile device to take you to 

the online manual.

9

Blade Cover

   The blade cover protects the blade 

when not in use. Simply slide it off 

the blade before use. Once finished 

operating, place the cover back 

over the blade.

Safety Guard 

   Ensure the safety guard is fitted 

securely onto the hedge trimmer 

before use. Tighten the screws on 

either side if necessary.

1.  Impact Guard
2.  Dual Action Cutting Blades
3.  Safety Guard
4.  Safety Switch

5.  Front Handle
6.  Lock-off Switch
7.  Sure Grip Handle
8.  On / Off Trigger

9.  Charge indicator button
10. Battery charge indicators
11. Battery release button

12. Charging  adaptor
13. Charger  LED
14. Charger  cradle

CORDLESS HEDGE TRIMMER

ACCESSORIES

KNOW YOUR PRODUCT

1.  ASSEMBLY

SETUP & PREPARATION

CAUTION!

 ENSURE THE TOOL IS OFF & THE BATTERY 

REMOVED BEFORE PERFORMING ANY OF THE 

FOLLOWING TASKS.

1

2

3

4

6

7

5

 WARNING!

 NEVER START THE HEDGE TRIMMER 

WHILE THE BLADE COVER IS FITTED.

13

8

12

14

 WARNING!

 NEVER USE THE HEDGE TRIMMER 

UNLESS THE SAFETY GUARD IS PROPERLY 

FITTTED.

 WARNING!

 WHEN HANDLING THE BLADE    

ASSEMBLY, WEAR NON-SLIP, HEAVY DUTY 

PROTECTIVE GLOVES. DO NOT PLACE YOUR 

HAND OR FINGERS BETWEEN THE BLADES OR IN 

ANY POSITION WHERE THEY COULD GET 

PINCHED OR CUT. NEVER TOUCH BLADES OR 

SRVICE THE UNIT WITH THE BATTERY PACK 

INSTALLED.

11

10

Содержание OBLTHTC-018























Отзывы: