MAINTENANCE
DESCRIPTION OF SYMBOLS
Warning
Regulatory Compliance Mark
(RCM)
V
Volts
Hz
W
Hertz
~
m³/min
km/h
Alternating Current
Watts
Cubic metres per minute
Kilometres per hour
cfm
Cubic feet per minute
Suitable for use in tropical
climates
Read Instruction Manual
T
Power tools that are no longer usable should not be
disposed of with household waste but in an environmentally
friendly way. Please recycle where facilities exist. Check
with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in
the environment. Please recycle packaging where facilities
exist. Check with your local council authority for recycling
advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
Cleaning
1. We recommend that you clean the appliance immediately after you
use it.
2. Keep the safety devices free of dirt and dust as much as possible.
Clean the appliance regularly with a dry soft cloth. Do not use
cleaning agents or solvents; these may be aggressive to the plastic
parts in the appliance. Ensure that no water can get into the interior
of the appliance.
Storage
Pull the mains plug out of the socket, switch off the tool and make
sure that it is secured in such a way that it cannot be started up again
by any unauthorised person.
Wrap the cord neatly around the cord organiser handle. Store the tool
in a dry location which is not accessible to unauthorised persons.
The unit has slots on each of the air inlet
grills that allow multiple units of this tool
to be stacked on their side for storage.
Ensure the tabs on the left side of the unit
are securely inserted into the reciprocal
slots on the right side of the unit.
WARNING!
DO NOT OPERATE THE AIR MOVER
WHILE IT IS STACKED.
Supply Cords
If replacement of the supply cord is necessary, this has to be done by
a certified electrician in order to avoid a safety hazard.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the tool by an unauthorised person or
by mishandling of the tool.
WARNING!
BEFORE CLEANING YOUR AIR
MOVER OR CARRYING OUT ANY MAINTENANCE
PROCEDURE, MAKE SURE THAT IT IS
DISCONNECTED FROM THE POWER SUPPLY TO
PREVENT ACCIDENTAL STARTING.
