MAINTENANCE
DESCRIPTION OF SYMBOLS
TROUBLE SHOOTING
• Keep the ventilation vents of the multipurpose saw clean at all times, if
possible, prevent foreign matter from entering the vents.
• After each use, blow air through the multipurpose saw housing to ensure it is
free from all dust particles which may build up. Build up of dust particles may
cause the multipurpose saw to overheat and fail.
• If the enclosure of the multipurpose saw requires cleaning, do not use
solvents but a moist soft cloth only. Never let any liquid get inside the
multipurpose saw; never immerse any part of the multipurpose saw into a
liquid.
Carbon Brushes
When the carbon brushes wear out, the multipurpose
saw will spark and/or stop. Discontinue use as
soon as this happens. They should be replaced
prior to recommencing use of the multipurpose
saw. Carbon brushes are a wearing component of
the multipurpose saw therefore not covered under
warranty. Continuing to use the multipurpose saw
when carbon brushes need to be replaced may
cause permanent damage to the multipurpose saw. Carbon brushes will wear
out after many uses but when the carbon brushes need to be replaced, take the
multipurpose saw to an electrician or a power tool repairer for a quick and low
cost replacement. Always replace both carbon brushes at the same time.
Note: Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the multipurpose saw by an unauthorised person or by
mishandling of the multipurpose saw.
SPARE PARTS
The on/off trigger is locked.
Ensure you have correctly held the lock-off switch (located on
the on/off trigger) down.
V
Volts
Hz
Hertz
~
Alternating current
W
Watts
/min
Revolutions or
reciprocation per minute
Double insulated
Maximum cutting cap
for timber
Warning
Read instruction manual
Wear ear protection
Wear eye protection
Wear face mask
n
o
No load speed
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: [email protected]
Содержание MSW-3000U
Страница 4: ...MSW 3000U ...
