OPERATION
2. CONTROLS
3. SANDING
2. To turn off, slide the
switch backwards.
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
1. To turn on, slide the
on/ off switch forward.
On / Off Switch
Variable Speed
For various applications, you will need to select the appropriate
speed for the task.
1. Turn multi function tool on.
2. Scroll through variable
speed dial to desired speed
setting.
Note:
The higher the number on the variable speed dial the
faster the oscillation frequency of the multi function tool.
1. Turn multi function tool
on and select appropriate
speed.
2. Place the multi function tool
flat on the workpiece.
Note: Do not apply heavy pressure to the tool or tilt the sanding
base as this will wear out the sanding paper and may damage the
sanding pad.
Changing Sanding Paper
2. Peel paper off pad from one
of the corners.
1. Align paper to pad and
press firmly to attach.
Triangular Rasp
1. Turn multi function tool
on and select appropriate
speed.
2. Place the multi function tool
flat on the workpiece.
This accessory is suitable when sanding materials which require
a large amount of material removal, for example: rough wood,
shaping timber, flaking paint and rust removal.
Note:
Periodicaly turn the unit off and remove any built-up
dust and debris.