OPERATION
9. TROUBLESHOOTING
8. REPLACING FUSE
Problem
Cause
Solution
The compressor
does not start
Compressor not
connected to the power
Connect the 12V
socket to a 12V DC
outlet
Insufficient supply
voltage
Try another 12V
outlet
Fuse needs replacing
Replace Fuse
The compressor
starts but there is no
pressure
Loose hose
connections
Check the
compressed air
hose and adaptor
and replace if
necessary
The seals are damaged Check the seals
and have any
damaged seals
replaced by a
service centre
LED torch wont turn
on
Compressor not
connected to the power
Plug the 12V socket
into a 12V outlet
Low pressure items
(such as sporting
equipment) not being
fully inflated
Internal line pressure
of the inflation hose
exceeds preset
pressure
Increase the
preset pressure on
the LCD display
and switch the
compressor off
when firm.
1 Unscrew the top of the 12V socket to expose the fuse.
The 12V socket is fitted with a 10A fuse to protect the air compressor. If
the compressor has stopped working and no lights or LEDs illuminate,
the fuse may need to be replaced.
2 Replace the fuse and screw the top back onto the 12V socket.
WARNING:
ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING STEPS.
