30°
LTR-301
1 Wear eye protection and stout shoes at all times while operating the
line trimmer.
2 Start cutting nearest the mains
power source and work away
to make it easier to avoid the
extension cord.
3 Do not push the line against
hard material (rocks or concrete)
during cutting as this may result
in damaged line.
4 Never use the line trimmer without its safety devices.
5 Do not cut grass that is wet (The best results are achieved on dry
grass).
6 Wait until the line trimmer reaches full speed before cutting the
grass
7
Keep the line trimmer away from hard objects in order to avoid
unnecessary wear to the line.
8 Several passes will be required to
cut long grass as shown.
9 To prevent the line from breaking
ensure you approach the edge/
object slowly.
10 Watch out for kickbacks in the
event of impact with hard objects.
11 After finishing the cutting operation, keep the head close to ground
level, release the switch and allow the motor to come to a complete
standstill. Unplug and place the line trimmer on the ground.
12 Keep ventilation slots of the trimmer clean at all times. Periodically
clean out the grass from the cutting head and the rim of the safety
guard to ensure efficient operation at all times.
Trimming
Edging
WARNING!
MAKE SURE THAT THE WORK AREA IS FREE OF
ROCKS, DEBRIS, LINES AND OTHER FOREIGN OBJECTS.
CAUTION:
DO NOT CONTINUALLY TAP, BUMP OR HOLD
THE SPOOL HOLDER ON THE GROUND AS THIS MAY
RESULT IN DAMAGE TO THE SPOOL HOLDER OR
OVERLOAD THE UNIT.
6. TRIMMING & EDGING
5. USING THE TRIMMER
Move the line trimmer from side to
side as you walk forward, holding
it at an angle of approx. 30° (Light
cuts are better than heavy cuts as
they allow the cut grass to fall away
from the cutting head).
Place the edging wheel along the
ground and roll the line trimmer
along the edge of the path.
