8. SPEED SELECTION
7. CONTROLS
OPERATION
On/Off Button
1. Press the on/off button to
turn the tool on. The battery
charge indicator LEDs will
illuminate.
2. To turn the tool off, press the
on/off button again.
Variable Speed Control
1. Once the tool is turned
on, press the ‘+’ button to
increase the speed.
Note:
The default speed of the tool when turned on is ‘3’. Press the
‘+’ and ‘-’ buttons as appropriate to vary the speed setting between 1
and 6.
2. To decrease the speed, press
the ‘-’ button.
Recommended Speed Settings
The figures listed below are intended as a guide only. Always test
settings and accessories on a scrap piece of material beforehand.
Timbers Plastics
Soft
Metals
Hard
Metals
Ceramic,
Stone,
Glass
Sanding
1-6
1-2
1-2
6
1-6
Cutting
6
3
3-6
3-6
-
Engraving
6
3-6
3-6
3-6
6
Drilling
6
1-6
3-6
-
-
Polishing
3-6
3-6
3-6
3-6
3-6
Grinding
6
-
2-3
6
3-6
