10
Remove the body of the lawn mower from the packag-
ing using the lifting handle (11) and place on a flat
surface (Fig. 1).
fitting the upper Handle to the lower Handles
Pull up and back on the upper handle ( 2) to raise
the handles into the operating position.
Secure the lower handle with the quick adjustment
knob (7) on both sides by aligning the notch and
tighten in a clockwise direction (Fig. 2).
Secure the upper handle with the tightening of the
handle securing knobs (3).
adjusting the height of the upper handle
The upper handle has two height position, to adjust the height
Loosen and remove the handle securing knobs (3)
Select the appropriate height hole on the lower
handle (12). Align the upper handle (2) using either
the lower position or higher position (Fig. 3).
Place the upper handle (2) over the upper ends
of the lower handles (12). Fit the supplied bolts
through the outer side of the upper handle (2) and
then through the holes in the lower handle (12).
Secure in place by screwing the supplied handle
securing knobs (3) over the protruding ends of the
bolts (Fig. 4).
1.
2.
3.
1.
2.
3.
4.
aSSemBly
Fig. 1
Fig. 2
Fig. 3
Fig. 4