background image

This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

•   Do not place the hose end against any part of your body when turned on, as this  

    may infuse air into your blood stream putting your health at serious risk.
•   Do not make any alterations to this air pump. Only use the adaptors supplied   

    with this product.
•   Use this product only in accordance with operation instructions included in this  

   manual.
•   It is not suggested that the air pump work continuously for more than 15 

 

      minutes. If 15 minutes of use has been reached, turn it off and let it cool for 8   

      minutes before using again.
•    If the pump is making abnormal sounds or its temperature is quite high, turn      

off the power straight away and let it cool for at least 10 minutes before trying again.  

Improper use may result in damage of the air pump.

•   Do not leave unattended and operating. Keep out of reach of children.
•   Put the air pump in a dry place if it is not in use for an extended period of time.

•   Keep the air pump away from flammable liquid or gas. Do not allow the  

 

  pump to become wet.
•   Never put the connector and adaptors into your mouth, ear or eye. They are not  

 toys.
•    Avoid inserting hands into the inlets/outlets of the air pump while it is connected to 

power.

•    Before using the air pump, always inspect it visually. Do not use the pump if it is 

cracked and/or damaged. If the pump is damaged, contact Ozito customer service.

•    Never work or perform maintenance on the pump without first making sure it has 

been disconnected from the mains power.

IMPORTANT:
•    The electrical connection must always be made in a dry area. Make sure that 

electrical connections are protected from inundations.

•    Protect the plug and the power cable from heat, oil or sharp edges.

•    If damaged, the power cable must be replaced by a qualified electrician.

AIR PUMP SAFETY WARNINGS

WARNING!

 

Read all safety warnings and all instructions. 

Failure to follow the 

warnings and instructions may result in electric shock, fire and/or serious injury. 

 

Save all warnings and instructions for future reference. The term “power tool” in the 

warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) 

power tool.

1. Work area safety 

a.  

 Keep work area clean and well lit

. Cluttered or dark areas invite accidents. 

b.  

 

Do not operate power tools in explosive atmospheres, such as in the presence of flammable

 

liquids, gases or dust.

 Power tools create sparks which may ignite the dust or fumes. 

c.  

 Keep children and bystanders away while operating a power tool.

 Distractions can cause 

you to lose control.

2. Electrical safety 

a.  

 Power tool plugs must match the outlet. Never modify the plug in any way. 

 

Do not use any adapter plugs with earthed (grounded) power tools.

 Unmodified plugs and 

matching outlets will reduce risk of electric shock. 

b.    

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges 

and refrigerators. 

There is an increased risk of electric shock if your body is earthed or 

grounded. 

c.    

Do not expose power tools to rain or wet conditions.

 Water entering a power tool will 

increase the risk of electric shock. 

d.  

 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power 

tool. Keep cord away from heat, oil, sharp edges or moving parts.

 Damaged or entangled 

cords increase the risk of electric shock. 

e.    

When operating a power tool outdoors, use an extension cord suitable for outdoor use.

  

Use of a cord suitable for outdoor use reduces the risk of electric shock. 

3. Personal safety 

a.  

 Stay alert, watch what you are doing and use common sense when operating a power 

tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol 

or medication.

  

A moment of inattention while operating power tools may result in serious personal injury. 

b.  

Use personal protective equipment. Always wear eye protection.

 Protective equipment 

such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate 

conditions will reduce personal injuries. 

c.  

 Prevent unintentional starting. Ensure the switch is in the off-position before connecting 

to power source and/or battery pack, picking up or carrying the tool. 

Carrying power 

tools with your finger on the switch or energising power tools that have the switch on invites 

accidents. 

d.    

Remove any adjusting key or wrench before turning the power tool on.

  

A wrench or a key left attached to a rotating part of the power tool may result in personal injury. 

e.    

Do not overreach. Keep proper footing and balance at all times.

 This enables better control 

of the power tool in unexpected situations. 

f.  

 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves 

away from moving parts.

 Loose clothes, jewellery or long hair can be caught in moving parts.

g.    

If devices are provided for the connection of dust extraction and collection facilities, 

ensure these are connected and properly used.

 Use of dust collection can reduce dust-

related hazards.

h.    

Do not let familiarity gained from frequent use of tools allow you to become complacent and 

ignore tool safety principles.

 A careless action can cause severe injury within a fraction of a second.

4. Power tool use and care 

a.  

 Do not force the power tool. Use the correct power tool for your application. 

The correct 

power tool will do the job better and safer at the rate for which it was designed. 

b.    

Do not use the power tool if the switch does not turn it on and off.

 Any power tool that 

cannot be controlled with the switch is dangerous and must be repaired. 

c.  

 Disconnect the plug from the power source and/or the battery pack from the power tool 

before making any adjustments, changing accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of starting the power tool accidentally. 

d.    

Store idle power tools out of the reach of children and do not allow persons unfamiliar 

with the power tool or these instructions to operate the power tool.

 Power tools are 

dangerous in the hands of untrained users. 

e.    

Maintain power tools. Check for misalignment or binding of moving parts, breakage of 

parts and any other condition that may affect the power tool’s operation. If damaged, 

have the power tool repaired before use.

 Many accidents are caused by poorly maintained 

power tools. 

f.  

 Keep cutting tools sharp and clean.

 Properly maintained cutting tools with sharp cutting 

edges are less likely to bind and are easier to control. 

g.    

Use the power tool, accessories and tool bits etc. in accordance with these instructions, 

taking into account the working conditions and the work to be performed. 

Use of the 

power tool for operations different from those intended could result in a hazardous situation. 

h.    

Keep handles and grasping surfaces dry, clean and free from oil and grease.

 Slippery handles and 

grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5. Service 

a.  

 Have your power tool serviced by a qualified repair person using only identical 

replacement parts. 

This will ensure that the safety of the power tool is maintained. 

GENERAL POWER TOOL SAFETY WARNINGS-PERSONAL SAFETY

ELECTRICAL SAFETY

 

WARNING! 

When using mains-powered tools, basic safety precautions, including the 

following, should always be followed to reduce risk of fire, electric shock, personal injury 

and material damage.

 

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before 

operating the tool. 
Save these instructions and other documents supplied with this tool for future reference.

The electric motor has been designed for 12V only. Always check that the power supply corresponds to the 

voltage on the rating plate.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid 

a hazard.

Отзывы: