ADDITIONAL INFORMATION
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric
and electronic equipment and its implementation in national laws, old
electric power tools have to be separated from other waste and disposed
of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the
owner of the electrical equipment must make sure that the equipment is
properly disposed of if he no longer wants to keep the equipment. The old
equipment can be returned to a suitable collection point that will dispose
of the equipment in accordance with the national recycling and waste
disposal regulations. This does not apply to any accessories or aids
without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of
documentation and papers accompanying products is permitted only with
the express consent of the iSC GmbH.
Subject to technical changes
Danger!
Sound and vibration
Sound and vibration values were measured in accordance with EN 60745.
L
pa
sound pressure level:
89.80dB(A)
K
pa
uncertainty:
2.77dB
L
wa
sound power level:
97.20dB(A)
K
wa
uncertainty:
2.77
dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) determined in
accordance
with EN 28662-1.
Front handle
Vibration emission value ah = 1.99 m/s
²
K uncertainty = 1.5 m/s
²
Rear handle
Vibration emission value ah = 2.95 m/s
²
K uncertainty = 1.5 m/s
²
The specified vibration value was established in accordance with a
standardized testing method. It may change according to how the electric
equipment is used and may exceed the specified value in exceptional
circumstances.
The specified vibration value can be used to compare the equipment with
other electric power tools.
The specified vibration value can be used for initial assessment of a
harmful effect.
Keep the noise emissions and vibrations to a minimum.
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
DECLARATION OF CONFORMITY
Wei/Product-Management
Weichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Electric Hedge Trimmer HTER-600U (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X
2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X
2011/65/EU
X
2006/42/EC
Annex IV
Notified Body:
Notified Body No.:
Reg. No.:
X
2000/14/EC_2005/88/EC
X
Annex V
Annex VI
Noise: measured L
WA
= 97,20 dB (A); guaranteed L
WA
= 100 dB (A)
P = 0,6 KW; L/Ø = 55 cm
Notified Body:
2012/46/EU
Emission No.:
Standard references: EN 60745-1; EN 60745-2-15;
EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3
Landau/Isar, den 11.09.2017
First CE: 17
Archive-File/Record:
NAPR017661
Art.-No.:
30.002.04
I.-No.: 11017
Documents registrar:
Alex Kurz
Subject to change without notice
Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
3000204_11017_HTER_600U.indd 135
26.10.2017 14:19:33
