MAINTENANCE
DESCRIPTION OF SYMBOLS
TROUBLESHOOTING
• When not in use, the Hedge Trimmer should be stored in a dry, frost free
location not within the reach of children.
• Keep ventilation slots of the Hedge Trimmer clean at all times and prevent any
foreign matter from entering.
• If the enclosure of the Hedge Trimmer requires cleaning do not use solvents
but a moist cloth only.
• There are no user serviceable parts in the Hedge Trimmer; if a fault is
suspected or the supply cord requires replacement, return the Trimmer to a
power tool repairer.
• The blade rail should be cleaned and treated with light machine oil or spray
lubricant (such as WD40, CRC 5.56 or RP7) after each use. When a job lasts
for a longer period of time it is recommended that the blade rail also be treated
with spray lubricant at regular intervals during operation.
Carbon Brushes
When the carbon brushes wear out, the hedge trimmer will spark and/or stop.
Discontinue use as soon as this happens. They should be replaced prior to
recommencing use of the hedge trimmer. Carbon
brushes are a wearing component of the hedge
trimmer therefore not covered under warranty.
Continuing to use the hedge trimmer when carbon
brushes need to be replaced may cause permanent
damage to the hedge trimmer. Carbon brushes
will wear out after many uses but when the carbon
brushes need to be replaced, take the hedge trimmer
to an electrician or a power tool repairer for a quick and low cost replacement.
Always replace both carbon brushes at the same time.
Note: Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the hedge trimmer by an unauthorised person or by
mishandling of the hedge trimmer. This tool is designed for DIY use - use in
commercial or industrial environments will void the warranty.
SPARE PARTS
Problem
Cause
Remedy
Blades are not
cutting smoothly.
Blades could be
worn or damaged
Contact customer service.
Poor lubrication
Lubricate
Excessive
sparking visible
through air vents
Carbon brushes
may have worn
out
Replace carbon brushes as
per maintenance section.
WARNING!
ENSURE THE HEDGE TRIMMER IS
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse or Homebase
store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: [email protected]
SERVICE INFORMATION
Please note that the following parts of this product are subject to normal
or natural wear and that the following parts are therefore also required
for use as consumables.
* Not necessarily included in the scope of delivery!
Category
Example
Wear parts*
Blade guide, Carbon brushes
Consumables*
Blade
Missing parts
Warning!
Safety class II
Do not expose the hedge trimmer to rain or wet conditions.
Wear eye protection and
ear plugs!
Read the operating instructions to reduce the rick of inguiry
If the cable is damaged or cut, pull out the power plug from the
mains immediately.
