ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. CHAIN & BAR
CAUTION!:
THE CHAIN HAS SHARP EDGES. FOR YOUR
OWN SAFETY, PLEASE USE WORK GLOVES.
KNOW YOUR PRODUCT
SETUP & PREPARATION
TELESCOPIC
POLE PRUNER
1. Chain
2. Guide bar
3. Chain sprocket cover
4. Motor housing
5. Telescopic shaft lock
6. Main shaft
7. Additional handle
8. Shoulder strap attachment
9. Oil tank cap
10. Chain tension dial
11. Chain cover lock
12. Switch lock
13. On/off trigger switch
14. Cord retainer
15. Chain sprocket
16. Bucking spikes
17. Rear handle
Fitting the guide bar and chain
1. Loosen the chain
cover lock and
remove the chain
sprocket cover.
2. Place the chain in the
groove of the guide bar
as shown. Refer to the
image printed on the
guide bar that indicates
the direction that the
chain should face.
3. Place the guide bar and
chain onto the mount,
ensuring that the chain
sits around the chain
sprocket.
4. Re-mount and finger-
tighten the side cover
with the chain cover
lock.
NOTE:
Only tighten the chain cover locking knob securely once the
chain tension has been adjusted (see:
Tensioning the chain)
.
WARNING!:
ENSURE THE TOOL IS
DISCONNECTED FROM THE POWER SUPPLY
BEFORE ASSEMBLY.
IMPORTANT!:
IF THE CHAIN IS INSTALLED
BACKWARDS (CHAIN CUTTERS ARE FACING IN THE
OPPOSITE DIRECTION OF ROTATION) THE POLE
PRUNER WILL VIBRATE EXCESSIVELY AND NOT CUT.
50
50
50
50
1
2
3
4
5
6
7
8
9
10 11 12 13
14
15 16
17
50
50
50
50
50
50
50
50