3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
0
10
20
30
40
50
0
10
20
30
40
50
Assembling the drill press
1. Carefully remove contents from the packaging.
2. Select a firm, level surface on which to assemble the drill press.
3. Select the base and
align the column over
the large hole. Align
the holes in the column
support with those in
the base and secure
in place using the 3
column support bolts,
spring and flat washers (supplied).
Using a 12mm spanner or shifter
(not supplied) securely tighten all
3 column support bolts.
4. Slide the table support over the
column. Using the table support
lock, secure the table into the
desired position.
5. Lift the head assembly and slide it
down onto the column as far as it
will go. To secure in position install
the two head lock screw. Tighten
using the 4mm Hex key, rotating in
a clockwise direction.
1. Pulley cover
2. Pulley cover knob
3. Feed wheel handles
4. Belt tension knob
5. Head lock screws
6. Feed wheel hub
7. Column
8. Table
9. Table support
10. Table support lock
11. Column support bolts x 3
12. Column support
13. Base
14. Head assembly
15. Depth indicator
16. ON/OFF Switch
17. Depth indicator lock nuts
18. Depth rod support
19. Depth rod
20. 13mm Keyed chuck
21. Depth scale
DRILL PRESS
KNOW YOUR PRODUCT
1
2
4
3
7
8
9
11
10
12
13
15
14
17
16
19
18
21
20
22
23
24
5
6
1. ASSEMBLY
SETUP & PREPARATION
WARNING!
DURING ASSEMBLY ENSURE THE
DRILL PRESS IS DISCONNECTED FROM THE
POWER SUPPLY.
ACCESSORIES
22. Chuck key
23. 3mm Hex key
24. 4mm Hex key
