2. CUTTING ANGLE CHECK
3. ON/OFF SWITCH
2. Loosen bevel adjustment knob.
Set to 0° on the scale. Tighten
bevel adjustment knob.
1. Set baseplate to maximum
depth of cut.
3. Confirm the angle between the blade and the baseplate is 90
°
using a square.
4. The cutting guide will give an approximate line of cut. For a
straight cut, use the 0° notch. For a 45° cut, use the 45° notch.
OPERATION
3. To turn the saw on,
depress the lock off
switch then the on/off
switch.
4. To stop the saw, release
the on/off switch.
WARNING:
AFTER USE, HOLD THE SAW AWAY
FROM YOUR BODY UNTIL THE BLADE STOPS
COMPLETELY. THIS MAY HELP TO PREVENT
SERIOUS INJURY.
Cutting Guide Notch
185MM X 16MM X 2.4MM X 24T
45°
cut
straight
cut
a
b
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
1. Connect the tool to the mains power supply.
2. Securely clamp your workpiece.
