!!
!!
ADDITIONAL SAFETY INSTRUCTIONS FOR CIRCULAR SAWS (cont.)
Additional safety instructions for laser lights
The laser light/laser radiation used in the Ozito Circular Saw CSL-235 laser is Class 2
with maximun 1mW and 650nm wavelengths. These lasers do not normally present an
optical hazard, although staring at the beam may cause flash blindness.
WARNING!
Do not stare directly at the laser beam. A hazard may exist if you
deliberately stare into the beam. Please observe all safety rules as follows:
•
The laser shall be used and maintained in accordance with the manufacturer’s
instructions.
•
Never aim the beam at any person or an object other than the work piece.
•
The laser beam shall not be deliberately aimed at personnel and shall be
prevented from being directed towards the eye of a person for longer than 0.25s.
•
Always ensure the laser beam is
aimed at a sturdy work piece
without reflective surface’, i.e. wood
or rough coated surfaces are
acceptable. Bright shiny reflective
sheet steel or the like is not suitable
for laser use as the reflective surface
could direct the beam back at the operator.
•
Do not change the laser light assembly with a different type. Repairs must only be
carried out by a power tool repairer.
Caution:
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Please refer to the relevant Australian standards, AS 2397 and AS/NZS2211
for more information on Lasers.
*kerf = groove cut in timber
9
CSL-235 manual.qxd 12/30/10 11:15 AM Page 9
Содержание CSL-235
Страница 1: ......
