7
•
The longest life and best performance can be obtained if the battery pack is
charged when the air temperature is between 18 - 24ºC. Do not charge the
battery pack in an air temperature below 10ºC or above 40ºC. This is
important and will prevent damage to the battery pack.
•
Do not incinerate the battery pack even if it is seriously damaged or is
completely worn out. The battery can explode in a fire.
•
Never attempt to open the battery pack for any reason. If the plastic housing
of the battery pack breaks or cracks, immediately discontinue use and do not
recharge.
•
During charging, the battery must be placed in a well ventilated area
•
Hold power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring or its own
cord.
Cutting accessory contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an electric shock.
•
Do not use the drill in wet or damp conditions.
•
Always keep the work area free of tripping hazards.
•
When using the drill always ensure you are wearing protective safety equipment
including safety glasses/goggles, ear muffs, dust mask and other protective
clothing including gloves and apron.
•
Always check the work piece before operation and remove any obstructions such
as nails, staples, screws, string, rags, cloths and other debris.
•
Always use clamps or a vice to hold down and secure the work piece.
•
Before drilling ensure there is a suitable gap below the work piece to prevent the
drill bit from touching any obstacles.
•
Before drilling holes or screwing into walls ensure that you are not breaking into
any electricity, gas or water supply line, etc.
•
Never change the direction of the chuck rotation while the tool is still running.
Ensure the chuck has come to a complete stop before changing the rotation of
the drill.
•
Do not lay the tool down unless the tool is switched off and the chuck has come
to a complete stop.
•
Keep hands and other body parts well away from the work area whilst the tool is in
use.
•
Keep hand well away from the under side of the work piece during use.
•
Do not use your hand to remove any dust, chips or other waste while the tool
is in use.
•
Do not touch the drill bit after operation. The bit will be HOT and burn.
BATTERY AND CHARGER SAFETY WARNINGS
!!
DRILL SAFETY WARNINGS! ADDITIONAL SAFETY RULES
!!
Содержание CDL-018
Страница 1: ......