Blowing
The blower can be used to clean
corners, fences, walls or beneath
cars.
Hold the blower firmly, turn the
trigger switch on, point the jet of air
in front of you and move forward
slowly. Move the blower from
side to side, with the tube several
inches above the ground.
Be careful where you point the jet
of air as it can move heavy material
and cause injury or damage to
bystanders.
Note.
Be aware of other people
and animals in the area where you
are to be operating the blower.
Note.
Avoid collisions with hard objects which could damage your
machine.
BLW-1800
3. USING THE BLOWER
4. GENERAL MAINTENANCE
MAINTENANCE
WARNING!
DO NOT USE THE BLOWER WITH ANY
TYPE OF ACCESSORY OR ATTACHMENT. SUCH
USAGE MIGHT BE HAZARDOUS.
• Keep air intake clean and air vents free of debris to avoid overheating
the motor.
• Do not use cleaning agents to clean the plastic parts of the tool.
A mild detergent on a damp cloth is recommended. Water must never
come into contact with the tool.
• If the blower vibrates abnormally, stop motor immediately. Abnormal
vibration usually indicates a mechanical problem continued operation
could lead to injury or damage.
• No lubrication is necessary as the motor is equipped with lifetime-
lubricated bearings.
Note:
Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the tool by an unauthorised person or by
mishandling of the tool.
WARNING:
BEFORE CLEANING YOUR BLOWER OR
CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE THAT THE MOTOR IS OFF AND THE BLOWER
IS DISCONNECTED FROM THE POWER SUPPLY TO
PREVENT ACCIDENTAL STARTING.
WARNING!
DO NOT SWITCH THE MACHINE ON
IN ENCLOSED OR POORLY VENTILATED SPACES
OR IN THE PRESENCE OF FLAMMABLE AND/OR
EXPLOSIVE LIQUIDS, GASES AND POWDERS.