ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
2. Tighten guard
bolt.
1. Spindle Lock
2. Adjustable Safety Guard
3. Side Handle
4 Lock On Slide Switch
ANGLE GRINDER
KNOW YOUR PRODUCT
1. SIDE HANDLE & GUARD
Side Handle
The side handle can be fitted on either side of your grinder. The
correct position will be determined by your preferred hand and the
operation being performed.
Removing
2. Turn side handle anti-
clockwise to loosen
and remove.
5. Pin Spanner
6. Hex Key
7. Inner Flange
8. Outer Flange
9. Metal Grinding Disc x 10
ACCESSORIES
SETUP & PREPARATION
Safety Guard
The safety guard should be used at all times whilst operating the
angle grinder.
Attaching
Removing
3. Loosen guard bolt.
Attaching
1. Screw the side
handle in clockwise
to firmly secure the
desired position on
the grinder.
1. Loosen guard bolt, align tabs and
rotate guard to the required position.
4. Align tabs on the guard with slots on the guard collar. Remove
guard.
Ensure the tool is disconnected from the power supply
before performing any of the following operations.
