ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1. HANDLES
Side Handle
The side handle can be fitted on both sides and the top of your
grinder. The correct position will be determined by your preferred
hand and the task.
1 Firmly attach the side
handle on the desired
side of the grinder.
Thread in clockwise.
2 Remove side
handle by turning
anti-clockwise.
SETUP & PREPARATION
Attaching
Removing
1 Spindle Lock
2 Side Handle
3 Handle Rotation Button
4 Rear Handle
5 Grinding Disc
6 Guard Locking Lever
7 Grinding Guard
8 Safety Lock Off Trigger
ANGLE GRINDER
9 Pin Spanner
10 Cutting Guard
11 Grinding Guard
12 Cutting Inner Flange (80mm)
13 Cutting Outer Flange (80mm)
14 Grinding Inner Flange
15 Grinding Outer Flange
16 Carbon Brushes
17 Paper Washer x 10
ACCESSORIES
The rear handle can be rotated to increase user comfort and to gain
better access to hard to reach or confined places.
Rear Handle
1 Pull back the handle
rotation button.
2 Rotate the rear handle 90° until it clicks into place.
1 2
3
4
5 6
7
8
9
10 11
12 13 14 15
16 17
CAUTION:
ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING:
NEVER START THE TOOL WITH THE REAR
HANDLE LOOSE. ENSURE IT IS SECURELY LOCKED IN
POSITION BEFORE OPERATING.